Products

Traditional:

Medical Imaging:

Visual Field Analysis:

Corneal Topography:

Screening Equipment:

Printable PDF

Woodlyn HR Slit Lamp

The Woodlyn HR-1 Slit Lamp features high resolution and consistent quality. Other features include halogen illumination, providing for a whiter and brighter image, a single joystick controlling both horizontal and vertical movements, and a microscope providing a wide field of view. Slit lamp adjustments are precise to insure accuracy. Its horizontal slit beam can be inclined to 30 degrees. Slit height is 10mm.

The Woodlyn HR-5 Slit Lamp provides the practitioner with all the features required to perform a complete slit lamp examination. The HR-5 is also adaptable to the many photo attachments available. The microscope offers a high degree of resolution with a five step magnification of 6x, 10x, 25x, and 40x. It also features an ultra fine slit illumination image, and a joystick with X-Y-Z position control.

Features

Woodlyn's HR-3 Slit Lamp offers a three step magnification of 10x, 16x, and 25x, and provides all the same outstanding features as the HR-5.

Optional Accessories:

HR-1:

  • Any slit lamp diagnostics lens
  • Woodlyn Applanation R-900 tonometer Motorized table

HR-3 / HR-5:

  • Any slit lamp diagnostic lens
  • Woodlyn Applanation R-900 tonometer
  • Motorized table
  • Beam Splitter
  • Camera Mounts (35mm or Video "C")
  • Observation (teaching) tube
  • Cameras: 35mm, Polaroid or Video
  • Digital Video & DSLR

Specifications

HR-1 Specifications

Gross Weight: 49 lbs.
Net Weight: 36 lbs.

Focusing:
Single hand controls for X, Y, and Z movements, at a 94mm working distance.

Microscope:
Converging optics that accommodates PD's of 52mm to 89mm. Flip lever magnification changer.

Magnification (Mag.) and Field of View (FOV):
Eyepeice Objective Mag. FOV
  10 1x1018mm
  10 1.6x1661.6mm
  16 1x1614.5mm
  16 1.6x25.69mm

Eyepiece Data:
10x and 16x eyepieces at a 13 degree convergence angle.
Adjustable focus of +/-8 Diopters.

 

HR-3 Specifications

Gross Weight: 50 lbs.
Net Weight: 33.68 lbs.

Focusing:
Single hand controls for X, Y, and Z movements, at a 102.5mm working distance.

Microscope:
Converging optics that accommodates PD's of 54mm to 79mm. Flip lever magnification changer.

Magnification (Mag.) and Field of View (FOV):
MicroscopeFOV
  10 29.5mm
  16 15mm
  25 7.5mm

Eyepiece Data:
12.5x eyepieces with adjustable focus of +/-7 Diopters.

  

HR-5 Specifications

Gross Weight: 50 lbs.
Net Weight: 37 lbs.

Focusing:
Single hand controls for X, Y, and Z movements, at a 97.5mm working distance.

Microscope:
Converging optics that accommodates PD's of 48mm to 78mm. Flip lever magnification changer.

Magnification (Mag.) and Field of View (FOV):
MicroscopeFOV
 635.5mm
 1022.5mm
 1614.5mm
 259mm
 405.75mm

Eyepiece Data:
12.5x eyepieces with adjustable focus of +5 to -6 Diopters.

Illumination System

Slit Projection: 2/3x

Slit Angle: Continuously variable

Filters: 2 cobalts, red-free, 10% Grey and heat absorbing.

Lamp(45070): 12 Volt 50 watt Halogen.

Apertures: 10,6,4,3,1 and 0.2

Slit Inclination: To 30 degrees in 10 degree increments.

Horizontal scanning: For easy retro illumination with centering knob.

The illumination control is located on the table top for ease of use. The module "clicks on" and gradually increase the light intensity as you adjust the knob. The variable light level is infinitely adjustable to accomodate today's digital cameras and special lighting needs.

Power Info

Power:
Input - 12 V.A.C.
Output - 12 Volt

The power supply is an integrated, low profile unit with built-in electronic short circuit and overload protection. The trimline housing is a fraction of the size and weight of most other power supplies.